Use the Cisco SPA112 adapter to send / receive FAXes

The use of FXS adapters for sending and receiving FAXes may have a higher failure rate than a traditional line, but in cases where you cannot connect your fax machine directly to a telephone line, it is possible configure the Cisco SPA112 adapter to connect a FAX...

Configure the Cisco SPA112 FXS 2 Analog Adapter

The Cisco SPA 112 is a SIP adapter for analog phones with 2 FXS ports. It therefore allows you to integrate up to two traditional analog devices (BCA and FAX) as extensions of the VOIspeed switchboard and thus take advantage of all the advanced functions of the PBX....

Gateway monitoring

This section displays the status of the gateways, i.e. the resources used to make and receive calls. Each line of global monitoring shows the status of a gateway. To learn more about gateways check here. The monitoring page is static by default: to activate the...

IP 2N Helios IP Vario Intercom – 1 button and camera

Home 5 Hardware 5 IP 2N Helios IP Vario Intercom – 1 button and camera IP 2N Helios IP Vario Intercom – 1 button and camera 2N Helios IP Vario – 1 button and camera – is an advanced IP intercom, based on the standard SIP protocol,...

IP 2N Helios IP Vario Intercom – 1 button

Home 5 Hardware 5 IP 2N Helios IP Vario Intercom – 1 button IP 2N Helios IP Vario Intercom – 1 button Helios IP is an IP intercom system based on SIP standards, which combines professional design and reliability. It is possible to use the Helios...