Configuration of the VOIspeed switchboard step by step

As for the UCloud environment, in this case there is no proprietary physical machine where to install This is a practical in-depth guide for configuring the VOIspeed 6 switchboard. The following article will therefore show criteria and suggestions for a correct basic...

How to configure an analog line

Analog lines are traditional telephone lines that allow you to make only one call at a time: thanks to the popularity of VoIP, recently operators (including Telecom Italia) can provide routers that emulate analog lines, however, using VoIP as a transmission protocol...

Auto configuration of Yealink phones

For the automatic configuration of a large number of terminals, we recommend the use of some devices dedicated to the purpose, in particular a router / DHCP server and at least one PoE switch, to be added to the corporate network configuration. The new router will act...

Update Polycom Phones Firmware from a Local Web Server

If you happen to need to update Polycom phones that can’t surf the net and you can’t set up an auto-provisioning server that requires you to activate option 66 in the DHCP server, you can have the firmware downloaded from a local server via the web just...

The GUI starts minimized and I can’t see it

Probably for some reason of changing monitor resolution, the GUI is shown “off” screen. Then you need to manually change the coordinates of the window. Here’s how to do it: Stop the GUI. If you cannot see the shutdown confirmation window, use the...